Industry
Jewelry Pendants
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Polishing Silver Medallions
The customer wanted to determine a process to reduce the amount of hand labor required to polish stamped silver medallions.
Cast Jewelry Ring
The customer wanted Bel Air to test multiple technologies to smooth over dental implants.
Investment Casted Ring
The customer wanted Bel Air to test multiple technologies to smooth over jewelry
3D Printed Jewelry Pendant
The customer wanted Bel Air to test multiple technologies to grind and polish this 3D printed jewelry pendant.
Polishing Gold Jewelry Beads
The customer wanted to determine an automated process to eliminate the need for hand finishing required for gold jewelry beads.
Copper Chain Bracelet
The customer wanted Bel Air to test multiple technologies in order to bright/ smooth shine a chain bracelet.
Class Rings
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Jewelry Bead
The customer wanted Bel Air to test multiple technologies in order to polish the gold jewelry bead.
Finger Ring
The customer wanted to ultra polish this copper ring. This was accomplished by using a multiple equipment's.
Twisted Wire Cuff Bracelet
The customer wanted Bel Air to test multiple technologies and to bright/ smooth shine their twisted wire cuff bracelet.
Sterling Silver Chain
The customer wanted these jewelry pieces to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pendant Charms
The customer wanted Bel Air to test multiple technologies to smooth over this piece of jewelry.
Sterling Silver Investment Casted Ring
The customer wanted Bel Air to test multiple technologies to smooth over this piece of jewelry.
Fashion Jewelry
The customer wanted these jewelry pieces to be polished. The centrifugal disc finisher was used to accomplish this.
Cuff Bracelet
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Art-Wear
The customer wanted Bel Air to test multiple technologies to smooth over their product.
Deburring Inconel Compressor Turbine Disc
The customer required controlled deburring of slots to keep within tolerances on a compressor turbine disc.
Aircraft Engine Compressor Disc Refurbishing
The customer requested that their Aircraft Engine Compressor Disc made of Inconel be refurbished/repaired.
Aircraft Engine Shroud Segment
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aerospace Missile Segments
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aerospace Electronic Package Enclosure
The customer requested deburring of the cut-out edges on an aluminum aircraft package that houses electronics.
Deburring Stainless Steel Engine Blade Stiffener
Belair reduced the hand deburring of multiple geometric slots made with multiple sizes and forms while maintaining tight tolerances.
Camera Enclosure
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aerospace Test Coupon
Before Post-Processing
After Post-Processing […]
AM Automotive Gear
The customer wanted Bel Air to test multiple technologies to smooth over dental implants.
Stainless Steel 3D Art
Objective
Post Processing polish […]
3D Medical Implant
Objective
Superpolish
[…] |
Revolver Frame, Aluminum
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Stainless Steel Fuel Nozzle
Before Post-Processing
After Post-Processing […]
3D Printed Artwork
Objective
Post-Processing Smoothing
Improve Flow Inside Medical Device Tube
Before Post-Processing
After Post-Processing […]
Clean & Improve COVID Swabs
Before Post-Processing
After Post-Processing […]
Clutch Disc Washer
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Pharmaceutical Steel Pill Punches
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Gun Barrel
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Coated Femoral
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Bone Implant Tooling
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Dental Bands
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Rotator Cuff
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Jaws for Operations
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Forceps
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Tulip Head Bone Screw Component
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Bone Screws with Tulip Heads
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Clamp Handle
test Post The customer wanted Bel Air to test multiple technologies and electropolishing on their 3D-printed consumer components.
Gun Drill
Objective
Hone Drill
Tool Steel Stamping Punch
Objective
Reduce 12 hr deburring process to […]
Ball End Mill
Objective
Hone Edge
Jobber Drill
Objective
Polish Coating for jobber drill, to […]
Carbide Cutting Tool Insert
Objective
Hone edge to increase life. […]
Carbide Cutting Tool Insert, Edge Preparation
Objective
Hone edge to increase life. […]
STAMPING PUNCH
Objective
Remove turn lines from machining counter […]
Alloy Steel, HSS, SPIRAL TAP
Objective
Hone edge and Deburr back side […]
SPIRAL TAP
Objective
Hone edge and Deburr back side […]
Deburr Steel Alloy Bolt Action
Objective
Deburr bolt action for Firearms part. […]
Cutting Tools
Objective
Hone Edge
Tool Holder Handle
Objective
Remove flash and blend for fit/function. […]
Delrin Machine Part
Objective
De-flash small internal slot. […]
Acrylic Machined Lever
Objective
Deburr edges for fit/function. […]
Injection Molded Part
Objective
Clean off all contaminants and dry […]
Delrin CNC Machined Part
Objective
De-flash in a conventional method to […]
Fiber Composite Material
Objective
Radius all surfaces of stamped edges. […]
Machined Housing Connector
Objective
De-flash and Matt Finish before coating […]
Injection Molded Handle
Objective
De-flash and Matt Finish before coating […]
PEEK Machine Component
Objective
Deburr and De-flash a Molded and […]
PEEK Bearing Retainer
Objective
Deburr and De-flash a Molded and […]
4140 Steel Gear
Before Post-Processing
[…]
Deburr and Polish Vape Components
Before
[…]
Deburring Brass Electronics Connector
Bel Air determined a consistent low labor process to bring tubing end radius to the customer's specification.
Deburring Stainless Steel Plunger Components
An example of micro deburring to validate a more economic method of part manufacturing than the current method.
Aluminum Housing
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Stapler Blades
The customer wanted these jewelry pe/jksdfoh;sIFA;OGIHQ'OEGRIQ'PJGHRIIEQ'PHI'QEPIHGIP'OQEIHOQ'/Q
Edge Prep Carbide End Mill
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Clean and Polish Reload Bullet Casing
Bel Air supplies domestic equipment and manufactures the dry polishing […]
Aluminum Gun Scope Mounting Rack
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Hollow Point Bullet Blank
Objective
Burnish bullet casings with or Bruni Roll Burnisher. […]
Bullet Blank
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Hammer and Sear
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rifle Barrel
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Sight Block
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Steel Alloy Revolver Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rifle Stock
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pistol Slide
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rifle Receiver
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rifle Latch
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Pistol Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Gun Triggers
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Paint Gun Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Gun Sear
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Revolver Cylinder
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rifle Clip Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Compound Bow
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pistol Parts
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Shotgun Receiver
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pistol Button
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Reload Casings
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Scope Rack
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Gun Bolt
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
AR Receiver
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pistol Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Revolver Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pistol Barrel
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Revolver Frame
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Receiver, Gun
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Ceramic Coated Turbine Blade
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Steel Alloy Turbine Blade
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Valve Shuttle
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aerospace Valve Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Hydraulic fitting
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Valve Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Turbine Compressor Blank
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Fuel Cell Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Compressor Blade
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Gears
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pill Punch
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Printed Metal Pill Punch
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Knob Accessory
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bracket
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Chain Sprocket
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Carbide Burnishing Roller
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Alloy Pneumatic Poppet Valve
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pneumatic Poppet Valve
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Transmission Gear
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Injector Valve
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Injector Molded Manifold
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Latches
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Manifold
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Injector Parts
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Trim Buttons
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Injector Nozzle
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Engine Valves
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Transmission Gears
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Attain Gears Surface
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Implant Device
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bone Screws
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Pill Punch
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bone Plate Sections
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bone Tap
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Spinal Jacket, PEEK
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tibia Tools
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Jaws for Operating Device
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Cobalt Chrome Tibia Tray
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Operating Device Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bone Screw
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Leg Prosthetic Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Endoscope Tip
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tibia Implant
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Implant Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Jaw Biopsy
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tubular Needle
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Operating Tool
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Titanium Bone Screws with Tulip Heads
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Stint Implant
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tibia Blocks
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Hip Ball
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Spinal Implant Device
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tibia Tray
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bone Plate
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Syringe Handles
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Medical Operating Device
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Tibia Trays
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Spinal Bone Screws with Tulip Head
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bevel Gears
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Turbine Blanks
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Casted Hardware
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
CNC Industrial Machined Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum CNC Part
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
CNC Piano Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Socket
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Thin Wall Tubing Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Railroad Cutter Tool Insert Holder
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Small Medical Part
The customer wanted Bel Air to test multiple technologies to smooth over dental implants.
Brass Fitting
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Brass Washer
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Piston Rings
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Connector
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Assorted CNC Lathe Parts
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Cast Yoke
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Titanium Machine Part
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Mount Block
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Stainless Steel Cross Shape Component
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Knurled Tool Handle
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Automotive Connector
The customer wanted Bel Air to test multiple technologies to smooth over dental implants.
Electronic Connector
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Aluminum Machined Heatsink Package
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Coaxial Connector
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bus Bar Connector
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Electrical Contacts
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Bus Duct
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Brass Electrical Contact
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Electrical Connector
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Minted Coins
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Emblematic Coins, Pins
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Coin Blank
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Casted Pendant
The customer wanted Bel Air to test multiple technologies to smooth over dental implants.
Insignia Badge
The customer wanted these jewelry pendants to be polished and cut down. The centrifugal disc finisher was used to accomplish this.
Rubber Mold Casted Pendants
The customer wanted Bel Air to test multiple technologies to bright/ smooth shine these rubber mold casted pendants.
Police Badges
Customer wanted to polish the badges. This was accomplished using centrifugal disc and barrel finishers.
Eliminate Hand Grinding in Pewter Pendants
The customer wanted to remove the hand labor for removing small hanging gates & parting line imperfections left from the mold.
Super Polishing a Punch
The customer wanted to determine a process to reduce the surface from a ground finish to a super polish finish of Ra 4 uin.
Electropolishing Consumer Goods
The customer wanted Bel Air to test multiple finishing technologies on their 3D-printed watch and consumer components.
Clear Coating Plastic Flower After De-Powdering
The customer wanted Bel Air to determine a process for de-powdering and clear coating a 3D printed flower.
Cleaning Laser Cut Monograms
The customer wanted to determine a process to reduce the amount of hand labor required to polish stamped silver medallions.
Polishing Stamped D-Rings
The customer wanted to determine a process to achieve a shiny finish for their stainless steel stamped d-rings.
Surface Preparation of Wooden Hardware
The customer wanted to reduce the amount of hand labor they spent on sanding the wooden hardware they produce.
Deburring Backside of Cutting Tool Flutes
Tool Honing of high speed steel cutting tool flute. Entails deburring the backside of the cutting tool flute.
Honing Straight Flute End Mill
Hone edge to remove burr (shown with edge burr from grinding) and increase performance of Straight Flute End Mill.
Honing Carbide Insert Cutter
Determined a labor and time saving process to hone and radius the edge of a Carbide Insert Cutter to .0004 in.
Honing Hardened Steel Cutting Tools
Determined a labor and time saving process for honing hardened steel cutting tools using Bel Airs Drag Finishers.
Reduced Machine Lines on Bone Plate
Bel Air determined a process to produce a semi-polish finish while reducing machine lines on titanium bone plates.
Reduced Machine Lines of Medical Implant
Bel Air determined a process to produce a semi-polish finish while reducing machine lines on titanium medical implants.
Deburring Brass Electronic Connector
Bel Air determined a process for deburring the inner area on a bronze electronic connector using a Centrifugal Barrel Finisher.
Deburring Slot on Electronic Connector
Bel Air determined a consistent low labor process for deburring the slots on a bronze electronic connector.
Stainless Steel Tubing End Radius
Bel Air determined a consistent low labor process to bring tubing end radius to the customer's specification.
3D Printed Tooth Model
A customer from the additive manufacturing industry wanted to determine a process for deburring and polishing 3D-printed tooth models.
Post Processing 3D Printed Tooth
The customer wanted to remove the matte rough look on side of the teeth to achieve a glossy, see-through finish.
Fiber Infused PEEK Plastic Seal
The customer wanted to determine the appropriate process to deburr plastic ring seals that have been reinforced with fiber.
Bronze Inner Ball Bearing Cage
The objective the customer wanted to accomplish was to radius the cross holes on a bronze inner ball-bearing cage.
Ultra Polishing A Steel Alloy Bearing Valve Component
The customer wanted to determine an efficient process to ultra polish valve balls which was accomplished using a centrifugal barrel finisher.
Deburring Roller Bearing Cage Slots
The customer wanted to determine a process that efficiently deburred the cage slots on a brass roller bearing cage.
Ultra Polishing Stainless Steel Valve Ball
The customer wanted to determine an efficient process to ultra polish valve balls which was accomplished using a Reverse Drag Finisher.
Deburring & Polishing Bearing Retainer
The customer wanted to determine an efficient process for deburring and polishing a steel alloy bearing retainer.
Steel Alloy Roller Bearing Race
The customer wanted to determine an efficient process to ultra polish Roller Bearing Race made of a steel alloy.
Radius Internal Holes of Inner Ball Bearing Cage
Bel Air determined a process to radius the internal holes on the bronze inner ball bearing cage using a centrifugal finishing machine.
Deburring Bronze Inner Bearing Cage
The customer wanted to determine a process that deburred the inner ball bearing slots on a brass inner cage.
Deburring and Polishing of Bearing Cage Ball Slots
The customer wanted the bearing ball slots on the steel alloy bearing cage to be deburred and then polished.
Refurbishing Automotive Housing
The customer wanted to remove all the carbon buildup that had accumulated in a Carbon Steel Diesel Turbo Vane.
3D Printed Intake Manifold
The customer wanted to remove and clean all excess build material from a BinderJet 3D printed Intake Manifold.
Refurbishing Diesel Turbo Vane
The customer wanted to remove all the carbon buildup that had accumulated in a Carbon Steel Diesel Turbo Vane.
Deburring Aluminum Automotive Connector
Using a Centrifugal Finishing Machine, Bel Air determined a method to deburr the edges and threads of an aluminum automotive connector.
Deburring Edges and Threads of Automotive Connector
Bel Air deburred the edges and threads of an aluminum automotive connector using centrifugal disc finishing.
Aluminum Automotive Connector
The customer wanted to determine a process to deburr the edges and threads of their aluminum automotive connectors.
High Volume Aircraft Hardware Deburring
Established inexpensive high volume approach to a one-step automatic process for deburring machined edges and imparting a cosmetic finish.
Aluminum Aircraft Hardware Polishing
Established a one-step automatic process for deburring machined edges and imparting a cosmetic finish in a cellular environment.
Aluminizing 3D Printed Fire Retardant ABS
The customer desired a quick turnaround for the post-processing & aluminizing of the fire-retardant ABS plastic.
Anodizing Miniature Colored Wheels
The customer desired a consistent color and finish. The customer stated the wheels did not need to be highly polished.
Ultem Plastic Fitting Deburring
The current process takes too long and is very time-consuming for the operator. The customer requested a more efficient method.
Post Processing 3D Printed Legend Ring
Bel Air helped the customer develop a manufacturing method with a faster JIT (just in time) delivery system while reducing hand labor.
Stainless Steel Piston Component Polishing
The customer wanted to eliminate hand finishing and go beyond their current capabilities of CNC turning and grinding.
Deburring and Rounding Plunger Edges
An example of micro deburring to validate a more economic method of part manufacturing than the current method.
Aluminum Heatsink Burnishing
Choose the correct media and compound so no lodging occurs. Smooth machine lines and bring to a bright shine.
Aluminum Block Burnishing
Choose the correct media and compound so no lodging occurs. Smooth machine lines and bring to a bright shine.
Deburring Aluminum Vape Parts
Customers' goal was to increase process throughput and to eliminate multiple hand deburring steps, with automated process technologies.
Deburring Steel CNC Parts
Customers goal was to improve current old-style deburring department with updated process media and equipment
Deburring Steel CNC Machined Parts
Customers goal was to improve current old-style deburring department with updated process media and equipment
Polishing Stainless Steel CNC Machined Fittings
Hand removing burrs is a time-consuming process. The process is to eliminate as much hand polishing labor and training as possible.
Deburring CNC Machined Part
Hand removing burrs is a time-consuming process. Removed hand labor, made a more consistent finish and a validatable process.
Polishing Brass Pull Bases
Determine the best process to eliminate the hand buff/polish currently being used. Hand labor is becoming more difficult to sustain.
Deburring Steel Gear Teeth
Develop a faster more efficient, low-cost method of removing burrs from the gear teeth without a secondary machining operation.
Deburring Gear Teeth
Develop a faster more efficient, low-cost method of removing burrs from the gear teeth without a secondary machining operation.
Deburring and Polishing Steel Firearm Internals
Bel Air demonstrates how to automate, validate and improve firearms deburring and polishing of internal mechanisms.
Deburring CNC Machined Internal Firearm Parts
Bel Air demonstrates how to automate, validate and improve firearms deburring and polishing of internal mechanisms.
Deburring and Polishing Aluminum Firearm Receivers
Bel Air demonstrates how to automate, validate and improve upon deburring and polishing firearm receivers.
Deburring and Polishing Pistol Magazine
The customer wanted to determine the best process to descale and polish pistol magazines to have a matte or bright finish.
Aluminum Shotgun Receiver Surface Preparation
The customer wanted to remove hand labor and make pre-coating finishing more consistent and of better quality in a Lean cell operation.
Deburring Steel Firearm Bolt
The customer wanted to determine a process to remove all burrs and improve the surface finish after machining.
Stainless Steel Medical Throat Device
Client wanted a smooth & polished finish on their DMLS 3D printed stainless steel medical throat operating device.
Cutting Tool Holder
Improving the surface finish of a metal SLM 3D printed stainless steel cutting toll holder.