Cutting action describes how aggressively the media removes material from the part. The abrasive type, grit size, binder, density, and overall formulation influence both the rate of material removal and the surface left behind.

In general:

  • Aggressive-cutting media removes burrs, scale, sharp edges, and machining marks more quickly but normally leaves a rougher surface.
  • Medium-cutting media balances material removal, cycle time, and surface refinement.
  • Fine-cutting or polishing media removes less material and generally requires a longer cycle, but it can produce a smoother finish.
  • Nonabrasive burnishing media primarily smooths and brightens through pressure and rubbing rather than cutting.

The fastest deburring process and the finest final finish are not always achievable in one operation. An aggressive cutting stage may need to be followed by a finer polishing or burnishing stage.

Terms such as coarse, medium, fine, fast cut, and high cut are helpful descriptions, but they are not necessarily standardized between manufacturers or formulations. Product data and sample processing should be used when comparing specific grades.