Post Processing Wet Blasting Equipment
A wet surface treatment process which cleans, descales, and degreases in a single operation without chemicals or solvents. A pressurized blasting mixture of water and abrasive media treats the part surface by scrubbing rather than impinging and impact, without changing close tolerance dimensions. The pressure blast process is the preferred method or preparing metal, plastic, and composite surfaces in the numerous industries, such as: Aerospace, Plating, Electronics, and more!
If you are unsure what equipment and media you require to achieve your desired surface finish, then send us your part, and we will evaluate it free-of-charge and provide you with a metrology report.
Product Comparison Table
| Model | Dimensions (D x W x H) | Door Opening | Total Air Consumption | Electrical | Suction | Pressure | Basket |
|---|---|---|---|---|---|---|---|
| FM-WJ Mini | 24″ X 20″ X 24″ | 10 X 12 | 40-60 cfm @ 80 psi | 115v | ✔ | N/A | N/A |
| FM-WJ Mini-T | 30″ X 20″ X 24″ | 10 X 12 | 40-60 cfm @ 80 psi | 115v | ✔ | N/A | ✔ |
| FM-WJ33-1 | 33″ X 33″ X 92″ | 22 X 22 | 40-60 cfm @ 80 psi | 115v/220v | ✔ | N/A | Optional |
| FM-WJ33-2 | 33″ X 33″ X 92″ | 22 X 22 | 40-60 cfm @ 80 psi | 115v/220v | ✔ | ✔ | Optional |
| FM-WJ36-2 | 36″ X 36″ X 92″ | 24 X 24 | 40 cfm @ 80 psi | 115v/220v | ✔ | ✔ | Optional |
| FM-WJ45-2 | 50″ X 40″ X 103″ | 29 X 29 | 40 cfm @ 80 psi | 115v/220v | ✔ | ✔ | Optional |
| FM-WJ65-2 | 60″ X 50″ X 104″ | 40 X 40 | 40 cfm @ 80 psi | 115v/220v | ✔ | ✔ | Optional |